Join thousands of businesses already trading on AraBazaar, free forever. No commissions, no middlemen.
MT-PZ ALZ55N is a high-performance thermosetting epoxy zinc-rich powder coating primer developed specifically for corrosion protection of mild steel. The…
Seller: Standard International Group (HK) Limited
Price: 2950.00 USD

PER PIECE
§ BULK ORDER
Competitive pricing · Dedicated account manager · Flexible delivery
MT-PZ ALZ55N is a high-performance thermosetting epoxy zinc-rich powder coating primer developed specifically for corrosion protection of mild steel. The zinc-rich formulation provides conductivity that enables cathodic protection, while the primer film provides an additional barrier against environmental exposure. This combination makes MT-PZ ALZ55N suitable for coating systems where enhanced steel protection and long-term coating performance are required. The primer has a smooth grey appearance and is designed for corona electrostatic spray application.
Zinc-rich powder coating primer Thermosetting epoxy formulation Designed for enhanced corrosion protection Combines cathodic and barrier protection Conductive zinc-rich formulation Supports cathodic protection of steel Specialized anticorrosive function Designed to improve protection in case of scratches Suitable for mild steel protection Designed for grit- or shot-blasted surfaces Smooth grey finish Suitable for corona electrostatic spraying Recommended film thickness of 70–120 µm Suitable for industrial steel coating systems Powder Properties Chemical Type: Thermosetting Epoxy Appearance: Smooth Colour: Grey Recommended Film Thickness: 70–120 µm Density: 2.9 ± 0.03 g/cm³ Application: Electrostatic Storage: Store in dry, cool conditions at or below 30°C Shelf Life: At least 12 months from production date Corrosion Protection Technology MT-PZ ALZ55N is based on a duplex corrosion protection system.
The epoxy zinc-rich formulation provides conductivity that enables cathodic protection. The zinc-rich primer is designed to provide additional protection to the steel substrate against corrosion.
The primer coating also creates a protective barrier between the steel surface and the surrounding environment, helping limit exposure to corrosive elements.
MT-PZ incorporates a specific anticorrosive function designed to improve protection when scratches or localized damage occur on the coating surface.
Proper surface preparation is essential for achieving the intended adhesion and corrosion protection performance. The recommended pretreatment depends on the substrate, surface condition, and required coating performance.
Sa 2.5 according to ISO NF EN 8501-1
Rz: 35–60 µm Ra: 6–12 µm Chemical pretreatment is not recommended for the specified mild-steel application. The supplied technical information also specifies restrictions for other substrate categories. Substrate preparation should therefore be selected according to the recommended MT-PZ coating system and technical guidance.
MT-PZ ALZ55N is suitable for corona electrostatic spraying. Tribo application is not recommended.
Initial fluidizing air pressure: 1.5 kg/cm² Fluidizing air pressure: 1 kg/cm² after initial setting Transport air pressure: 0.5–0.8 kg/cm Recommended voltage: 65–70 kV Application settings may require optimization depending on the powder coating equipment, component geometry, substrate, and production conditions.
70–120 µm Maintaining the recommended film thickness is important for achieving the intended corrosion protection and coating system performance.
Before applying a compatible topcoat, the MT-PZ primer should be fully cured or at least gelled according to the recommended curing schedule.
Object temperature must not be below 110°C Object temperature must not exceed 180°C Primer should be cured in a convection oven Infra-red heaters may optionally be used Oven air temperature should not exceed 180°C Correct primer curing or gelling is important for achieving appropriate topcoat adhesion and overall coating system performance.
Recycling trials should be performed using suitable recovery equipment before production begins. For consistent powder application and coating performance, a minimum of 70% new powder should be maintained when using reclaimed powder. Gun nozzles should be cleaned every 30 minutes to help maintain consistent application performance.
Mild steel components Steel structures Fabricated steel products Industrial machinery components Structural steel components Heavy-duty metal fabrications Industrial equipment Outdoor steel structures Steel components requiring corrosion protection Zinc-rich powder primer systems Duplex powder coating systems Steel products requiring a protective topcoat
MT-PZ ALZ55N is designed for customers seeking a zinc-rich epoxy powder coating primer for enhanced steel corrosion protection. Its combination of zinc-rich conductivity, cathodic protection, barrier protection, and specialized anticorrosive performance makes it suitable for demanding industrial coating systems. When applied over correctly prepared steel and used with a compatible topcoat, MT-PZ ALZ55N provides a robust primer solution for applications where corrosion resistance, substrate protection, and long-term coating performance are important. Zinc-rich powder coating primer, MT-PZ ALZ55N, MT-PZ ALZ55N powder coating, zinc powder coating primer, zinc-rich powder primer, epoxy zinc-rich primer, zinc-rich epoxy powder coating, thermosetting epoxy primer, corrosion protection powder coating, anticorrosive powder coating primer, anti-corrosion powder primer, mild steel powder coating primer, steel powder coating primer, cathodic protection primer, cathodic protection powder coating, zinc-rich primer for steel, industrial powder coating primer, corrosion-resistant powder coating, steel corrosion protection coating, zinc primer for mild steel, zinc-rich coating, protective powder coating primer, electrostatic powder coating primer, corona electrostatic powder coating, duplex corrosion protection coating, industrial steel coating, heavy-duty powder coating primer, grit-blasted steel primer, zinc-rich epoxy coating.