Join thousands of businesses already trading on AraBazaar, free forever. No commissions, no middlemen.
MT-PZ ALZ44TH is a thermosetting epoxy zinc-rich powder coating primer designed specifically for steel protection. The formulation is intended to work as…
Seller: Standard International Group (HK) Limited
Price: 2950.00 USD

PER PIECE
§ BULK ORDER
Competitive pricing · Dedicated account manager · Flexible delivery
MT-PZ ALZ44TH is a thermosetting epoxy zinc-rich powder coating primer designed specifically for steel protection. The formulation is intended to work as part of a duplex coating system, providing both a barrier effect and cathodic protection. The zinc-rich formulation provides electrical conductivity that supports cathodic protection of the steel substrate. The coating's specific anticorrosive function also helps improve protection in areas where the coating may be scratched or mechanically damaged. MT-PZ is dedicated to steel protection and is designed for application over properly grit- or shot-blasted surfaces.
Zinc-rich powder coating primer Thermosetting epoxy formulation Designed for enhanced corrosion protection Combines cathodic protection and barrier protection Zinc-rich conductive formulation Provides cathodic protection to steel substrates Enhanced protection in case of scratches Specifically designed for steel protection Suitable for properly grit- or shot-blasted surfaces Smooth grey finish Suitable for corona electrostatic spray application Designed for demanding industrial coating systems Suitable for use beneath compatible topcoat systems Powder Properties Chemical Type: Thermosetting Epoxy Appearance: Smooth Colour: Grey Recommended Film Thickness: 70–120 µm Density: 2.9 ± 0.03 g/cm³ Application: Electrostatic Storage: Store in dry, cool conditions at or below 30°C Shelf Life: At least 12 months from production date Corrosion Protection Technology
The specific epoxy zinc-rich formulation provides conductivity that enables cathodic protection of the steel substrate. The zinc-rich primer is designed to provide an additional level of protection against corrosion.
The primer also forms a protective coating barrier between the steel substrate and the surrounding environment, helping reduce exposure to moisture and other corrosive elements.
MT-PZ incorporates a specific anticorrosive function designed to improve protection in areas where the coating has been scratched or locally damaged.
Surface preparation should be selected according to the substrate type, surface condition, required coating performance, and intended service environment. For MT-PZ, proper mechanical surface preparation is particularly important because the primer is designed for application over grit- or shot-blasted steel surfaces.
Grit blasting to Sa 2.5 according to ISO NF EN 8501-1.
Rz: 35–60 µm Ra: 6–12 µm Chemical pretreatment is not recommended for the specified mild-steel application. For other substrates, the appropriate pretreatment should be determined according to the manufacturer's technical recommendations and the required coating system.
MT-PZ is suitable for corona electrostatic spraying. Tribo application is not recommended.
Initial fluidizing air pressure: 1.5 kg/cm² Fluidizing air pressure after initial setting: 1 kg/cm² Transport air pressure: 0.5–0.8 kg/cm² Recommended voltage: 65–70 kV Application parameters may require adjustment according to the powder coating equipment, component geometry, substrate, and production conditions.
70–120 µm Maintaining the recommended film thickness is important for achieving the intended corrosion protection and overall coating system performance.
MT-PZ primer should be cured or at least gelled according to the recommended curing schedule before application of the topcoat.
Object temperature must not be below 110°C Object temperature must not exceed 180°C Primer should be cured in a convection oven Infra-red heaters may optionally be used Oven air temperature should not exceed 180°C Correct curing or gelling of the primer is important for achieving appropriate adhesion and performance of the subsequent topcoat.
Recycling trials should be carried out using suitable recovery equipment before starting production. Particular attention should be given to the ratio of new and reclaimed powder. A minimum of 70% new powder should be used. For consistent application performance, gun nozzles should be cleaned every 30 minutes.
Mild steel components Steel structures Fabricated steel products Industrial steel equipment Structural steel components Heavy-duty metal fabrications Industrial machinery components Outdoor steel structures Corrosion-resistant coating systems Steel components requiring zinc-rich primer protection Duplex powder coating systems Steel products requiring a protective topcoat
MT-PZ ALZ44TH provides a specialized zinc-rich epoxy powder coating primer for applications requiring enhanced steel corrosion protection. Its combination of cathodic protection, barrier protection, conductive zinc-rich technology, and scratch-protection capability makes it suitable for demanding industrial steel coating systems. When correctly pretreated, applied, cured, and combined with a compatible topcoat, MT-PZ can provide a robust protective coating system for steel components exposed to demanding service conditions. Zinc rich powder coating primer, zinc-rich powder coating, MT-PZ ALZ44TH, MT-PZ powder coating primer, zinc powder coating primer, zinc epoxy powder coating, epoxy zinc rich primer, zinc rich epoxy primer, corrosion protection powder coating, anti-corrosion powder primer, anticorrosive powder coating primer, steel powder coating primer, mild steel powder coating primer, cathodic protection powder coating, cathodic protection primer, zinc rich epoxy primer for steel, industrial powder coating primer, corrosion resistant powder coating, steel corrosion protection coating, zinc primer for steel, zinc rich coating, protective powder coating primer, electrostatic powder coating primer, corona electrostatic powder coating, duplex corrosion protection coating, industrial steel coating, heavy duty powder coating primer, grit blasted steel primer.